Automix
Global Automix Settings
The global settings are available through the automix controller in conn.automix:
Call on AutomixController | Description |
|---|---|
responseTime$ | Global response time (linear, between 0 and 1) |
responseTimeMs$ | Global response time in milliseconds (between 20 and 4000 ms) |
setResponseTime(value) | Set global response time (linear, between 0 and 1) |
setResponseTimeMs(timeMs) | Set global response time in milliseconds (between 20 and 4000 ms) |
groups | Access to automix groups a and b |
The state of the two automix groups a and b can be controlled through the AutomixGroup object.
First, get access to a group:
const groupA = conn.automix.groups.a;
const groupB = conn.automix.groups.b;
Each group exposes the following methods and properties:
Call on AutomixGroup | Description |
|---|---|
enable() | Globally enable this automix group |
disable() | Globally disable this automix group |
toggle() | Toggle the state of this automix group |
state$ | Active state of this automix group (0 or 1) |
Automix Channel Assignment
Assignment of channels to the automix groups can be done through the MasterChannel object.
Important: Only input channels on the master bus can be used in automix groups.
A channel can only be assigned to exactly one or no group.
After getting access to a MasterChannel input (e.g. conn.master.input(1)), the following operations are available:
Call on MasterChannel | Description |
|---|---|
automixWeight$ | Automix weight (linear) for this channel (between 0 and 1) |
automixWeightDB$ | Automix weight (dB) for this channel (between -12 and 12 dB) |
automixGroup$ | Automix group (a, b, none) that this channel is assigned to |
automixAssignGroup(group) | Assign this channel to an automix group (a, b, none). This also includes stereo-linked channels. |
automixRemove() | Remove this channel from the automix group. This does the same as automixAssignGroup('none'). |
automixSetWeight(value) | Set automix weight for the channel (linear between 0 and 1) |
automixSetWeightDB(dbValue) | Set automix weight for the channel (dB between -12 and 12) |
automixChangeWeightDB(offsetDB) | Change the automix weight relatively by adding a given value |